If you’ve ever been roosted by rocks, had your knuckles clipped by tree branches, or dropped your bike and broken a lever off you know the value of handguards. The best dirt bike handguards are designed to protect not only your hands but save your clutch or brake lever in a crash.
Of course, not all riders are looking for the same benefits out of their handguards.
If you are an enduro rider tackling some pretty tough, rocky terrain or an adventure rider who finds himself a long way from anywhere, the last thing you want is a broken clutch or brake lever. It can make life very difficult if you’re not carrying a spare.
If you are a motocross rider you may only be looking for roost protection, or if you do a lot of street riding you may be looking to keep your hands warmer in the winter months. In this case you may not need the heavier duty Enduro style handguards.
I’ve been riding dirt bikes since back when handguards didn’t exist, and now that we have these available to us, it spells the end of broken levers and injured knuckles.
In this review, I look at 6 of the best dirt bike handguards of both Enduro and Motocross styles.
Quick Summary
Best Enduro Handguards:
1. Cycra Probend CRM Handguards – Top Pick Most Innovative Design
2. Barkbusters EGO Handguards
3. Acerbis Rally Pro X-Strong Handguards – Best Value For Money Enduro Handguards
Best Motocross Handguards:
4. Cycra Stealth DX Handguards
5. Acerbis Uniko Vented Handguards – Best MX Handguard
6. PowerMadd Star Series Handguards – Best Budget MX/Universal Handguard
How To Choose The Right Handguards
There are a few things to be aware of when choosing handguards.
Dirt Bike handguards are basically divided into two types, the open MX type usually used by motocross riders, and wrap-around handguards used by enduro & trail riders. It depends on the level of protection you’re looking for.
Motocross (Open) Handguards
If you race motocross, you know all about roost. Motocross Handguards are designed to deflect roost and protect your hands from rocks and mud, but will not protect your levers.
They fix to the handlebars at only one point. If you drop the bike, they will probably break.
They are lighter and sleeker than wrap-around handguards, and may even offer a bit of warmth for your hands on cold days if you use them for trail riding.
It’s not only motocross riders who use this type, but some trail/enduro bikes also come fitted with open handguards.
Advantages of MX Handguards:
- Open-end design allows easy hand movement
- Lighter weight
- Less bar clutter with single-point fixing
- Less expensive than wrap-around guards
- Easier to install
Disadvantages of MX Handguards:
- Will not protect your hands from large impacts from trees or rocks
- Will not prevent breakage of levers
- Will probably break in a crash
Enduro/Trail Riding (Wrap-Around) Handguards
Wrap-around handguards are designed to not only protect your hands but save your levers if you crash. The full wrap-around brace behind the plastic shield fixes to your handlebars in two places, the end of the handlebar and to the bar again closer to the handlebar clamps.
Typically in enduro and trail situations, you want protection from branches (and even trees) and the last thing you want is to have to ride home without a clutch lever. I know this from personal experience before handguards were even available.
The name ‘Barkbusters’ has become synonymous with this type of handguard (the Australian company that first developed the concept for dirt bikes back in 1984) but they now have a lot of competition from the likes of Acerbis, Cycra, and Tusk to name a few.
Advantages of Wrap-Around Handguards :
- A much higher level of durability
- Will survive most crashes
- Protects your hands in a crash
- Will save your levers in a crash
Disadvantages of Wrap-Around Handguards:
- May limit hand movement on the bars
- Heavier than MX handguards
- More difficult to mount and requires cutting of the grips
- Higher cost than MX handguards
Top 3 things to consider:
1. What type of riding do you do? Whether you ride motocross, enduro, or trail, there’s no law that says you can’t use MX-type handguards if you’re trail riding or Enduro-type handguards if you ride motocross. It just comes down to the level of protection you are looking for.
2. What diameter handlebars do you have? Stock handlebars are a standard 7/8″ (22mm) diameter. You have to be careful in your selection if you have aftermarket tapered bars, or oversize (fat bars) which are usually 1 1/8″ (28mm) diameter. It’s important to order the right size for your bars.
3. The color you want. Most come in a wide range of colors to coordinate with your bike’s colors.
Best Enduro Handguards
1. Cycra Probend CRM Handguards (7/8″ handlebar)
The Cyrca Probend has been a rider’s favorite for a few years. Cycra has been mainly known for its plastic bodywork, but its Probend handguards are one of the best on the market.
The Probend CRM has a couple of unique features not found on other handguards.
The aluminum brace has a dip-down bend at the fixing to the handlebar end. The reason for this is that it allows easier hand access or removal.
It’s also a safety feature that reduces the chance of having your hand snag on the handguard in the event of a crash. There is also a replaceable plastic abrasion bar that fits over the aluminum brace at the end fixing to protect the aluminum brace.
The other unique feature is the central handlebar fixing. It fixes to the bar right next to your handlebar clamps and provides maximum reach and clearance of other gear fixed to your bars.
The Center Reach Mount (CRM) system avoids the problem of fixing the clamp on the bend or angled part of the bar, which is different for every bike.
The replaceable plastic hand shields are quite large, but if you prefer something a little smaller, there are lower-profile hand shields available that easily fix to the same screw holes.
One thing to be aware of is that the shield fixing screws are self-tapping, which means there is no thread in the holes in the aluminum brace. Not a big deal, screws just take a little more effort to screw in.
They come with all necessary hardware and installation is a lot easier than some other models.
Also, be aware they are not a universal handlebar size, so it is necessary to order either the 7/8″ or 1-1/8″ oversize bar model.
Features:
- Trademark Probend shape
- Patent Pending design
- Center Reach Mounts (CRM) provides maximum reach and clearance to fit a wide range of bars
- Available for 7/8″ and 1-1/8″ handlebars
Pros:
- The dropped design keeps hands from catching on bar
- Replaceable plastic guards
- Made in the USA
- Large color selection
Cons:
- Price
2. Barkbusters EGO Handguards (7/8″ handlebar)
Barkbusters have been manufacturing handguards since 1984, so they have over three decades of experience in producing the finest handguards available today.
The Barkbusters EGO is one of the toughest handguards on the market today.
The aluminum backbone is heat-treated for maximum strength, and the plastic guards are replaceable, as is every piece in the kit.
I have been using EGO handguards on my KTM for 10 years now. They have withstood every impact with the ground, rocks or trees, and show no signs of deterioration other than a few scratches on the plastic guards.
The EGO handguards are available for 7/8″ and tapered bars, and also EGO Mini handguards for Youth bikes 80cc to 150cc with 7/8″ bars.
For a Full Review on the Barbusters EGO: Barkbusters EGO Handguard Review
Features:
- Heat-treated aluminum backbone for maximum strength
- Replaceable high impact-resistant plastic guards
- A compact curved profile that is ideal for tight bush riding.
Pros:
- Toughened aluminum backbone
- Easy to install
- Replaceable plastic guards
Cons:
- Price
3. Acerbis Rally Pro X-Strong Handguards
The Acerbis Rally Pro X-Strong Handguards are a very popular handguard and come with fittings to allow you to fit them to both 7/8″ or 1-1/8″ bars.
A unique feature of these is that the anodized aluminum backbone is encased in the plastic guards for extra strength.
This, of course, means that the plastic guard section is not replaceable if you scratch it.
The indexed steel bar-end fitting is a great feature to prevent the guards from rotating if you crash. This is often a problem with handguards and some may require retightening occasionally.
They are designed to allow plenty of room for cables and brake lines.
Pricing is mid-range between cheap handguards and high-end professional level.
Features:
- Includes X-strong universal mounting kit for both 7/8″ and 1-1/8″ handlebars
- High-impact nylon composite handguards are injection molded around a hard-anodized aluminum inner support backbone
- Includes an indexed steel bar-end insert that mounts solidly and prevents the guard from rotating in a crash
- Available in Black, Orange, Red, Blue & White
Pros:
- Durable backbone
- Easy to install
- Reasonably priced
Cons:
- Plastic guards not replaceable
Best Motocross Handguards
4. Cycra Stealth DX Handguards
The Cycra Stealth DX Handguards are a lightweight MX type handguard that comes with aluminum mounting brackets.
They were designed with input from the Monster Energy Yamaha Factory Racing Team.
The Stealth DX handguards are constructed of durable injection-molded plastic with an in-molded rubber edge to provide better roost and brush protection.
The brackets are constructed of aircraft-grade 6061T-6 aluminum which provides a solid mounting to both standard and oversize bars.
The set comes with a rotating bolt plate, which means the brackets can be mounted above or below the levers.
They’re a mid-range priced MX style handguard which makes them a good choice if you don’t want to go cheap, but also don’t want to blow your budget.
Features:
- Lightweight MX style allows for maximum freedom of adjustment and space for levers
- Brackets are aircraft grade quality 6061T-6 aluminum
- Mounts completely independently of your lever perches to give you the flexibility to mount them anywhere on the bars
- Rotating bolt plate allows brackets to be mounted above or below the levers
- Fits 7/8″ handlebars or oversize bars that taper to 7/8″ at the ends
Pros:
- Easy to install
- Lightweight
- Fit almost any full-size bike, mini or quad
- Large color selection
Cons:
- Roost protection only
5. Acerbis Uniko Vented Handguards
Acerbis is a company who are constantly improving their products. They were established in Italy in 1973. The Acerbis Vented Uniko has been developed in response to feedback from their professional riders.
Acerbis realized there was a demand for a vented version of their popular Uniko handguard.
The large venting panel is strategically placed to best direct airflow past the levers.
The universal mounting system has also been improved which allows the guards to be positioned independently of the angle of the levers.
Features:
- Well-ventilated for riding in hot areas
- Lightweight Polypropylene construction for the best performance and durability
- The included universal mount kit allows the guards to be positioned independently of the angle of the levers
- The universal mounting brackets are suitable for all MX bikes
- Nylon mount kit included – Aluminum Race mounting kit also available
Pros:
- Easy to install
- Good ventilation
- Lightweight
- Low priced
- Large color selection
Cons:
- Mounts are nylon not aluminum
- Roost protection only
6. PowerMadd Star Series Handguards
The PowerMadd Star Series Handguards are another vented handguard like the Acerbis Uniko at No. 5, but with the added option to be able to snap the cover back in for cooler weather riding.
These are a multi-purpose universal handguard and can be used on ATVs and snowmobiles as well. Because of this wide range of uses the mounting kit is sold separately.
They are fully adjustable kits that consist of aluminum brackets, hardened steel straps, and stainless steel hardware.
As they are available for Motorcycle, ATV and snowmobiles it is important to select the right Handguard Mount Kit.
The mounting kit has a slight bend in the mounting brackets which flares the end of the handguard away from the handlebar, which provides more room for brake and clutch levers
Features:
- Removable vent covers allow airflow but still block branches and debris
- Snap the vent covers back in for riding in cooler weather
- Offers plenty of room for clutch and brake levers
- 1 year ‘no questions asked’ warranty
Pros:
- Removable vent covers
- Multi-purpose use
- Large color selection
Cons:
- Mounting kit sold separately
Conclusion
Top Pick Most Innovative Design: Cycra Probend CRM Handguards
These handguards get my vote for their innovative mounting design at both ends of the brace. The drop-down end fixing reduces the chance of hands catching on the brace, and the Center Reach Mount (CRM) system which fixes near the handlebar clamps. They’ve been a popular rider’s favorite for years.
Best Value For Money Enduro Handguards: Acerbis Rally Pro X-Strong Handguards
Acerbis has been around a long time and the Rally Pro handguards are a quality wrap-around handguard that gives you all the strength you need at an affordable price.
Best MX Handguard: Acerbis Uniko Vented Handguards
The Acerbis Uniko handguards have long been a rider favorite and now the vented model gives riders looking for ventilation a new favorite.
Related Posts
Barkbusters EGO Handguard Review
10 Best Dirt Bike Upgrades For Dual Sport Riding
Which type of handguards do you prefer, the open or wrap-around type? Have you used any of the handguards reviewed here? Let us know your thoughts below.
Wow, it’s pretty well-organized review.
Well, I actually know Motocross handguards only so I find Enduro/Trail Riding handguards for the first time.
I’m not sure if it is more comfortable than the one I used. But I want to use it because the one that I used was so weak.
Wrap-Around handguards would survive most crashes and be a much higher level of durability.
I think durability is the most important factor when I choose handguards.
Thanks for the explanation! I think I’m going to buy the one you recommend!
Hi Shawn. Yes, I agree, the wrap around guards give your hands and levers the best protection. They save you money every time you drop the bike and don’t break off a lever.
Thanks for dropping in.
My husband is looking for a great deal on this. I cannot choose for him so he’ll have to visit this page again. I’ll bookmark this for later.
But overall you have a good collection of Handguards here. I like the one that you mentioned cannot break even if you smash it against something.
Thank you for this post and all the best.
Hi Aabidah, thanks for your comments. Hope this post is some help to your husband. The wrap around guards are what I use for the best protection, there are some good ones on the market now.
This is a very useful review on hand guards. Everyone that embark on any outing always wish to get home safe, so investing on a safer hand guide that can protect one from rock,mud or other things that can injure or dirty our hands should be the top priority for our motor cycle after making sure the Tyre and seat are in good shape. I knew how the barkbuster look like. It has been on market for a long time. I still remember it is what my uncle is using. It can also last longer.
Hi Stella, yes the Barkbusters have been around a long time. They’re what I use and have saved my hands more times than I can remember. Thanks for your thoughts.
This is an extensive range of information you offer here, I can totally decide from here what I would purchase.
Great site
Staci
Hi Staci, thanks for your thoughts. Hopefully, I’ve made deciding easier for people with this review.
Greg
I am new to dirt biking…. and doing MX and trail right now on my Honda crf150f… and want to put on hand guards….I don’t know what I will do more off and expect I will buy different bike next year… First I was told to get the wrap around… but then told not good on track as I may break my wrist? What do you suggest at this early stage of my riding life – lol!
Hi Renae. It all depends on where you do most of your riding.
If most of your riding is on a motocross track then you are better with the open MX style guards. There is that danger in motocross with the wrap-around guards that if you fall awkwardly and get your hand caught in the guard, then there is a chance of injury. They don’t do much to protect the levers from breaking, but that is not an issue if you only have to ride back to the pits.
If most of your riding is trail riding and you get to some pretty remote areas, then you are better with the wrap-around guards, because if you break a clutch or brake lever it can make the long ride home difficult, especially if it’s the clutch lever that’s broken and you have to gear change and stop without a clutch. I know this from personal experience.
Hope this has answered your question. If you are buying another bike next year you can always take them off and fit them to the new bike if the handlebar is the same size.
Thanks for dropping in. Greg
New full wrap design coming to the market? Maybe.
I just got back into woods riding after 18 years off a bike, (boy, bikes got tall. I lowered mine, because it was insane IMO), and did not really like the design of the full wrap guards on the market, (especially with pro taper bars I use.), but I want bark shredding protection, so full wraps are a must for me. I have a little machine shop for my small business, and some engineering experience, so I decided to modify a set of Cycra pro bend full wraps. I just finished making the prototypes and bolted them on. They look like the “flag style” from the front, as they don’t have the bars that go to the handlebar clamps, (which will stiffen up the bar flex.), and you can use your stock bar pad. They are more compact, probably lighter than any other full wrap, (I know lighter than the Cycra), are very rigid, (can maybe use the tie downs on them, but I probably would not. Would be cool for a demonstration tough). But they can also be set up to twist, in case you are worried about breaking your arm in one during a crash, but may twist on a tree and need to be twisted back if they are set that loose. I found the names of 10 companies, and I would like to sell the design to one of them.
Wish me luck. 🙂 Doug in Michigan
Hi Doug. I think you’re onto something. I’ve never seen a handguard like your prototype. You’re combining the best of both worlds, tough enough to protect your hands and the levers, but open like the MX style.
I’d be very interested in hearing how you get on with selling your design to the big companies. You’ll have to be careful that they don’t take your idea and pay you nothing.
Good luck!
Greg
I want to share a story about some guy I went riding with decades ago, who had the bran new Bark Busters on their bikes. I would say people had been using them for maybe 6 months in Michigan at the time, but I did not have a set. So I am seeing them for the fist time, and it then did not take me long to understand why the bark was missing from saplings that were too close to the trail to survive the new invention. When we got back to the parking lot after the 40 mile loop in Michigan (Little O), all those guys with the new aluminum knuckle (since they are not made of brass), were all excited when talking about how much they likes them. One of the guys said that he was hitting 2 saplings at the same time, one on each end of the bar, and just mowing though them. I asked him, “How big of a set of trees do you think you can hit?”
His answer,————–“As big as it takes to lift the front wheel off the ground.”.
Hope you liked it
Doug in Michigan
Hi Doug. Thanks for sharing that great story. I remember in my teens there was no such thing as handguards (except maybe on farm bikes) and I used to regularly break levers and have to ride home on the road with no clutch. Very tricky at the traffic lights. When they first appeared I got some Barkbusters brand and have never broken a lever since. A simple idea but saves lots of skinned knuckles and saves money on new levers.
Thanks for your thoughts.
Greg